LT86121GXE
1. Description
LT86121GXE is a high performance HDMI2.1 or DP1.4a repeater. In long cable application, it should be paired with LT86121GXE.
Both the HDMI2.1 input and output support data rate up to 10Gbps which provides sufficient bandwidth for 4K@144Hz, 8K@30Hz or 8K@60Hz with compression data (pass
through). Also, HDCP2.3 is supported for data decryption and encryption.
Both the Type-C or DP1.4a input and output support data rate up to 8.1Gbps which provides sufficient bandwidth for 4K@144Hz, 8K@30Hz or 8K@60Hz with compression data
(pass-through). Also, HDCP2.3 is supported for data decryption and encryption.
In paired mode, DSC can be used to reduce data rate and hence bandwidth requirement. Furthermore, FEC can be activated to correct data error and help to enhance system error
tolerance level. These unique techniques together will significantly extend transmission distance.
Two digital audio interfaces are available, I2S and SPDIF. The I2S interface supports 8-ch LPCM and the SPDIF interface supports 2-ch LPCM or compressed audio, both at
maximum 192 KHz sample rate.
The device is capable of automatic operation which is enabled by an integrated microprocessor that uses an embedded SPI flash for firmware storage. System control is also
available through the configuration I2C slave interface.
2. Features
• HDMI2.1 Receiver
• Type-C
• DP1.4a/eDP1.4b Receiver
• HDMI2.1 Transmitter
• DP1.4a/eDP1.5 Transmitter
• Digital Audio input and Output
• DSC Decoder and Encoder
3. Applications
• Active Cables
• Surveillance
