1. 说明 LT948DX 解串器是 Lontium 用于高级驾驶辅助系统 （ADAS） 的长距离视频传输系列的一部分，旨在通过最大 15m 同轴 （POC） 或 STP 电缆为 eDP 视频传输提供解决方案。该芯片提供 8.1Gbps/通道正向数据通道和反向控制通道，并支持为电缆供电。 2. 特点 • eDP发射器• 汽车显示端口发射器• 汽车显示端口接收器• 其他 3. 应用 • 汽车显示应用 1. Description The LT948DX deserializer is a part of Lontium's long distance video transmission family for Advanced Driver Assistance Systems(ADAS), designed to provide a solution for eDP video transmission...
1. Description The Lontium LT1258 is a quad 2:2 cross-point switch or splitter with signal conditioning suitable for high-speed bus applications with data rates up to 12.5 Gbps. The continuous time linear equalizer (CTLE) of the receiver provides adjustable boost to compensate up to 25 dB insertion-loss at 6.25 GHz. The...
1. Description The Lontium LT2911R is a high performance convertor which interconvertible between MIPI DSI/CSI-2/Dual-Port LVDS and TTL. The LT2911R deserializes input MIPI/LVDS/TTL video data, decodes packets, rotates video, changes frame rate and converts the formatted video data stream to MIPI/LVDS/TTL transmitter output between AP and mobile display panel or camera.The...
1. 描述 Lontium LT89101 是一款高性能 MIPI DSI/CSI-2 和 LVDS 中继器，用于汽车系统应用的移动显示或摄像头信号整形。LT89101 采用先进的 CMOS 工艺制造，采用小外形 7.5mm x 7.5mm QFN64 封装。该封装符合 RoHS 标准，额定工作温度范围为 -40°C 至 +85°C.2 。特性• 支持 3 位最大 10dB 输入均衡• 无需数据解包的信号再驱动• 输入和输出每数据通道 80Mb/s~1.8Gb/s• 1.8V 单电源• 支持 100KHz I2C 从机• 外部 48MHz ±100ppm 晶体参考时钟• 温度范围：-40°C 至 +85°C • 采用 QFN64 封装 7.5mm x 7.5mm 3.应用 • 移动系统•...
1. Description The Lontium LT8918L is a high performance Dual-Port LVDS to MIPIDSI/CSI-2 bridge chip between AP and mobile display panel or camera.LT8918L can be configured as single-port or dual-port with optional De-SSC function. The bridge deserializes input LVDS data, decodes packets and converts the formatted video data stream to MIPIDSI/CSI-2...
1. Description The Lontium LT8918 is a high performance MIPIDSI/CSI-2 transmitter for mobile display panel or camera application.The TTL input of LT8918 supports both 24-bit RGB and BT656/1120 video format under either SDR or DDR sampling. The maximum input pixel clock frequency is SDR 148.5MHz or DDR 74.25MHz for 1080P@60Hz high-end mobile...
